Conditions of licenses issued under § 32.26: Quality control, labeling, and reports of transfer.

CFR · 2024-01-01 · US · Title 10

Each person licensed under § 32.26 shall: (a) Carry out adequate control procedures in the manufacture of the product to assure that each production lot meets the quality control standards approved by the Commission; (b) Label or mark each detector and its point-of-sale package so that: (1) Each detector has a durable, legible, readily visible label or marking on the external surface of the detector containing: (i) The following statement: “CONTAINS RADIOACTIVE MATERIAL”; (ii) The name of the radionuclide and quantity of activity; and (iii) An identification of the person licensed under § 32.26 to transfer the detector for use pursuant to § 30.20 of this chapter or equivalent regulations of an Agreement State. (2) The labeling or marking specified in paragraph (b)(1) of this section is located where its will be readily visible when the detector is removed from its mounting. (3) The external surface of the point-of-sale package has a legible, readily visible label or marking containing: (i) The name of the radionuclide and quantity of activity; (ii) An identification of the person licensed under § 32.26 to transfer the detector for use pursuant to § 30.20 of this chapter or equivalent regulations of an Agreement State; and (iii) The following or a substantially similar statement: (4) Each detector and point-of-sale package is provided with such other information as may be required by the Commission; and (c) Maintain records of all transfers and file a report with the Director

official document · source cfr-2024 · id 10:§ 32.29