Compliance Certification.

CFR · 2024-01-01 · US · Title 10

(a) (1) The representations as to the basic model must be based on use of a certification organization; or (2) Any testing of the basic model on which the representations are based must be conducted at an accredited laboratory. (b) (i) The nominal full load efficiency for each basic model of electric motor distributed is not less than the minimum nominal full load efficiency required for that motor by § 431.25; (ii) All required determinations on which the Compliance Certification is based were made in compliance with the applicable requirements prescribed in this subpart; (iii) All information reported in the Compliance Certification is true, accurate, and complete; and (iv) The manufacturer or private labeler is aware of the penalties associated with violations of the Act and the regulations thereunder, and of 18 U.S.C. 1001 which prohibits knowingly making false statements to the Federal Government. (2) (ii) The Compliance Certification must identify the basic models on which actual testing has been performed to meet the requirements of § 431.17. (iii) The format for a Compliance Certification is set forth in appendix C of this subpart. (c) (d) (e) (f) (2) (A) DOE will provide a single unique CC number, “CC________,” to the manufacturer or private labeler, and such CC number shall be applicable to all electric motors distributed by the manufacturer or private labeler, or (B) When required by paragraph (f)(3) of this section, DOE will provide more than one CC number to the

official document · source cfr-2024 · id 10:§ 431.36