Test Procedures for the measurement of energy efficiency of small electric motors.

CFR · 2024-01-01 · US · Title 10

(a) (b) (1) (i) CSA C747-09: (A) Section 1.6 “Scope” as specified in paragraphs (b)(2)(ii) and (b)(3)(ii) of this section; (B) Section 3 “Definitions” as specified in paragraphs (b)(2)(ii) and (b)(3)(ii) of this section; (C) Section 5 “General test requirements” as specified in paragraphs (b)(2)(ii) and (b)(3)(ii) of this section; and (D) Section 6 “Test method” as specified in paragraphs (b)(2)(ii) and (b)(3)(ii) of this section. (ii) CSA C390-10: (A) Section 1.3, “Scope” as specified in paragraph (b)(4)(ii) of this section; (B) Section 3.1, “Definitions” as specified in paragraph (b)(4)(ii) of this section; (C) Section 5, “General test requirements—Measurements” as specified in paragraph (b)(4)(ii) of this section; (D) Section 7, “Test method” as specified in paragraph (b)(4)(ii) of this section; (E) Table 1, “Resistance measurement time delay” as specified in paragraph (b)(4)(ii) of this section; (F) Annex B, “Linear regression analysis” as specified in paragraph (b)(4)(ii) of this section; and (G) Annex C, “Procedure for correction of dynamometer torque readings” as specified in paragraph (b)(4)(ii) of this section. (iii) IEC 60034-1:2010: (A) Section 7.2 as specified in paragraphs (b)(2)(iii), (b)(3)(iii), and (b)(4)(iii) of this section; (B) Section 8.6.2.3.3 as specified in paragraphs (b)(2)(iii), (b)(3)(iii), and (b)(4)(iii) of this section; and (C) Table 5 as specified in paragraphs (b)(2)(iii), (b)(3)(iii), and (b)(4)(iii) of this section. (iv) IEC 60034-2-1:2014: (

official document · source cfr-2024 · id 10:§ 431.444