Training program: Approval of flight simulation training devices.

CFR · 2024-01-01 · US · Title 14

(a) Each FSTD used to satisfy a training requirement of this part in an approved training program, must meet all of the following requirements: (1) Be specifically approved by the Administrator for— (i) Use in the certificate holder's approved training program; (ii) The type airplane and, if applicable, the particular variation within type, for which the training or check is being conducted; and (iii) The particular maneuver, procedure, or flightcrew member function involved. (2) Maintain the performance, function, and other characteristics that are required for qualification in accordance with part 60 of this chapter or a previously qualified device, as permitted in accordance with § 60.17 of this chapter. (3) Be modified in accordance with part 60 of this chapter to conform with any modification to the airplane being simulated that results in changes to performance, function, or other characteristics required for qualification. (4) Be given a daily functional preflight check before being used. (5) Have a daily discrepancy log kept with each discrepancy entered in that log by the appropriate instructor or check airman at the end of each training or check flight. (b) A particular FSTD may be approved for use by more than one certificate holder. (c) A Level B or higher FFS may be used instead of the airplane to satisfy the inflight requirements of §§ 121.439 and 121.441 and appendices E and F of this part, if the FFS— (1) Is approved under this section and meets the appropriat

official document · source cfr-2024 · id 14:§ 121.407