Training courses using flight simulation training devices.

CFR · 2024-01-01 · US · Title 14

(a) Training courses utilizing FSTDs may be included in the certificate holder's approved training program for use as provided in this section. (b) Except for the airline transport pilot certification training program approved to satisfy the requirements of § 61.156 of this chapter, a course of training in an FFS may be included for use as provided in § 121.441 if that course— (1) Provides at least 4 hours of training at the pilot controls of an FFS as well as a proper briefing before and after the training. (2) Provides training in at least the following: (i) The procedures and maneuvers set forth in appendix F to this part; or (ii) Line-oriented flight training (LOFT) that— (A) Before March 12, 2019, ( ( ( (B) Except as provided in paragraph (b)(2)(ii)(B)( ( ( ( ( ( ( (3) Is given by an instructor who meets the applicable requirements of § 121.412. (c) The programmed hours of flight training set forth in this subpart do not apply if the training program for the airplane type includes— (1) A course of pilot training in an FFS as provided in § 121.424(e); or (2) A course of flight engineer training in an FSTD as provided in § 121.425(d). (d) Each certificate holder required to comply with § 121.358 of this part must use an approved FFS for each airplane type in each of its pilot training courses that provides training in at least the procedures and maneuvers set forth in the certificate holder's approved low-altitude windshear flight training program. The approved low-altitud

official document · source cfr-2024 · id 14:§ 121.409