Digital flight data recorders.

CFR · 2024-01-01 · US · Title 14

(a) Except as provided in paragraph (l) of this section, no person may operate under this part a turbine-engine-powered transport category airplane unless it is equipped with one or more approved flight recorders that use a digital method of recording and storing data and a method of readily retrieving that data from the storage medium. The operational parameters required to be recorded by digital flight data recorders required by this section are as follows: the phrase “when an information source is installed” following a parameter indicates that recording of that parameter is not intended to require a change in installed equipment: (1) Time; (2) Pressure altitude; (3) Indicated airspeed; (4) Heading—primary flight crew reference (if selectable, record discrete, true or magnetic); (5) Normal acceleration (Vertical); (6) Pitch attitude; (7) Roll attitude; (8) Manual radio transmitter keying, or CVR/DFDR synchronization reference; (9) Thrust/power of each engine—primary flight crew reference; (10) Autopilot engagement status; (11) Longitudinal acceleration; (12) Pitch control input; (13) Lateral control input; (14) Rudder pedal input; (15) Primary pitch control surface position; (16) Primary lateral control surface position; (17) Primary yaw control surface position; (18) Lateral acceleration; (19) Pitch trim surface position or parameters of paragraph (a)(82) of this section if currently recorded; (20) Trailing edge flap or cockpit flap control selection (except when paramete

official document · source cfr-2024 · id 14:§ 125.226