Damage-tolerance and fatigue evaluation of structure.

CFR · 2024-01-01 · US · Title 14

(a) (1) Each evaluation required by this section must include— (i) The typical loading spectra, temperatures, and humidities expected in service; (ii) The identification of principal structural elements and detail design points, the failure of which could cause catastrophic failure of the airplane; and (iii) An analysis, supported by test evidence, of the principal structural elements and detail design points identified in paragraph (a)(1)(ii) of this section. (2) The service history of airplanes of similar structural design, taking due account of differences in operating conditions and procedures, may be used in the evaluations required by this section. (3) Based on the evaluations required by this section, inspections or other procedures must be established, as necessary, to prevent catastrophic failure, and must be included in the Airworthiness Limitations section of the Instructions for Continued Airworthiness required by § 25.1529. The limit of validity of the engineering data that supports the structural maintenance program (hereafter referred to as LOV), stated as a number of total accumulated flight cycles or flight hours or both, established by this section must also be included in the Airworthiness Limitations section of the Instructions for Continued Airworthiness required by § 25.1529. Inspection thresholds for the following types of structure must be established based on crack growth analyses and/or tests, assuming the structure contains an initial flaw of the ma

official document · source cfr-2024 · id 14:§ 25.571