Identification data.

CFR · 2024-01-01 · US · Title 14

(a) The identification required by § 45.11 (a) through (c) must include the following information: (1) Builder's name. (2) Model designation. (3) Builder's serial number. (4) Type certificate number, if any. (5) Production certificate number, if any. (6) For aircraft engines, the established rating. (7) On or after January 1, 1984, for aircraft engines specified in part 34 of this chapter, the date of manufacture as defined in § 34.1 of this chapter, and a designation, approved by the FAA, that indicates compliance with the applicable exhaust emission provisions of part 34 of this chapter and 40 CFR part 87. Approved designations include COMPLY, EXEMPT, and NON-US, as appropriate. After December 31, 2012, approved designations also include EXEMPT NEW, and EXCEPTED SPARE, as appropriate. (i) The designation COMPLY indicates that the engine is in compliance with all of the applicable exhaust emissions provisions of part 34. For any engine with a rated thrust in excess of 26.7 kilonewtons (6000 pounds) which is not used or intended for use in commercial operations and which is in compliance with the applicable provisions of part 34, but does not comply with the hydrocarbon emissions standard of § 34.21(d), the statement “May not be used as a commercial aircraft engine” must be noted in the permanent powerplant record that accompanies the engine at the time of manufacture of the engine. (ii) The designation EXEMPT indicates that the engine has been granted an exemption pursuant t

official document · source cfr-2024 · id 14:§ 45.13