Minimum performance requirements for standard remote identification unmanned aircraft.

CFR · 2024-01-01 · US · Title 14

A standard remote identification unmanned aircraft must meet the following minimum performance requirements: (a) (b) (c) (2) The unmanned aircraft must not be able to take off if the remote identification equipment is not functional. (3) The unmanned aircraft must continuously monitor the remote identification functionality from takeoff to shutdown and must provide notification of malfunction or failure to the person manipulating the flight controls of the unmanned aircraft system. (d) (e) (f) (g) (2) Any broadcasting device used to meet the requirements of this section must be integrated into the unmanned aircraft without modification to its authorized radio frequency parameters and designed to maximize the range at which the broadcast can be received, while complying with 47 CFR part 15 and any other applicable laws in effect as of the date the declaration of compliance is submitted to the FAA for acceptance. (h) (2) The reported geometric altitude of the control station must be accurate to within 15 feet of the true geometric altitude, with 95 percent probability. (3) The reported geometric altitude of the unmanned aircraft must be accurate to within 150 feet of the true geometric altitude, with 95 percent probability. (4) The unmanned aircraft must broadcast the latitude, longitude, and geometric altitude of the unmanned aircraft and its control station no later than 1.0 seconds from the time of measurement to the time of broadcast. (5) The unmanned aircraft must broadcas

official document · source cfr-2024 · id 14:§ 89.310