General.

CFR · 2024-01-01 · US · Title 7

Only domestic owners are eligible to receive U.S. ATP certificates for equipment in service, with certification based upon the following: (a) For equipment which has not previously been certified: (1) For each unit of equipment, a test in a U.S. ATP testing station or in a testing station located in and approved by a country which is a Contracting (2) If the equipment consists of serially-produced equipment manufactured by a particular equipment manufacturer, and belonging to one owner, certification may be based upon the following: (i) A test of 1 percent of the units of equipment as prescribed in preceding paragraph (a)(1) of this section, the units tested to serve as reference equipment. (ii) An inspection of each unit of equipment, using the procedures set forth in ATP, Annex 1, Appendix 2, paragraphs 29 and 49. The inspections shall be performed by one of the following, at the choice of the owner: (A) Persons in the owner's organization whom the owner deems qualified to perform inspections, or; (B) By an independent inspection agency which the owner deems competent to perform inspections. Fees charged by such inspection agency shall be payable directly to the agency by the owner. (iii) A report of each inspection shall be completed on a form corresponding to the pertinent test report model in ATP, Annex 1, Appendix 2. Report forms may be obtained by a request to the ATP manager. (b) For renewal of a U.S. ATP certificate which is nearing its expiration date, any of the fo

official document · source cfr-2024 · id 7:§ 3300.76