Normal, tightened, or reduced inspection.

CFR · 2024-01-01 · US · Title 7

(a) (b) (c) (d) (1) (i) The preceding 10 inspection lots (or more, as indicated by the note to Table III-B) which have been inspected within the preceding 6 months have been on normal inspection and none has been rejected on original inspection; and (ii) The total number of defects in the samples from the preceding 10 inspection lots (or such other number of lots used for condition in paragraph (d)(1)(i) of this section) is equal to or less than the applicable number given in Table III-B. If a double sampling plan is used, all samples inspected should be included, not “first” samples only; and (2) (i) An inspection lot is rejected on original inspection; or (ii) Production becomes irregular (delayed or accelerated); or (iii) Other valid conditions warrant that normal inspection shall be reinstituted. (3) (4) (e) When the rules require a switch in the inspection status because of one or more classes of defects, all classes of defects shall be inspected under the new inspection criteria. At the option of the user of the service and when approved by the Administrator, such user may elect to remain on normal inspection when qualified for reduced inspection, or on tightened inspection when qualified for normal inspection. (f) (2) (3) (4) (5) (6)

official document · source cfr-2024 · id 7:§ 42.108