Inspection of grain in combined lots.

CFR · 2024-01-01 · US · Title 7

(a) (b) (i) Be filed in accordance with § 800.116; (ii) Show the estimated quantity of grain that is to be certified as one lot; (iii) Show the contract grade, and if applicable; other inspection criteria required by the contract; and (iv) Identify each carrier into which grain is being loaded or from which grain is being unloaded. (2) (c) (2) (i) The grain in each lot was sampled in a reasonably continuous operation; (ii) The original inspection certificates issued for the single, composite, or average quality lots have been surrendered to official personnel; (iii) Representative file samples of the single, composite, or average quality lots are available; (iv) The grain in the single, composite, or average quality lots is of the same grade or better grade and quality than as specified in the written instructions provided by the shipper; (v) Official personnel who performed the inspection service for the single, composite, or average quality lots and the official personnel who are to recertify the grain as a combined lot must determine that the samples used as a basis for the inspection of the grain in the single, composite, or average quality lots were representative at the time of sampling and have not changed in quality or condition; and (vi) The quality or condition of the grain meets uniformity requirements established by the Service for official inspection of grain in combined lots. (d) (e) (f) (g) (h) (2) (3) (4) (5) (i) The date of inspection of the grain in the comb

official document · source cfr-2024 · id 7:§ 800.85